Single Suspension for OPGW
Suspension Set for OPGW used primarily for straight-sided drop tower, or less than 15 º line tower connection. Clamp screw from the inside and outside the two pre-twisted wire, hanging head and supporting the composition of connecting fittings. Clamp grip strength is greater than the tensile strength of fiber optic cable rated 10% -20%, for the transfer axial loads, and distributed radial compressive stress, better protection of fiber optic cable, to avoid the phenomenon of bending stresses and stress concentration.
Suspension Set for OPGW with the Suspension has excellent fatigue resistance, the power
cable can also play a supporting role in damping.
■ Pictures and illustrations:
1. Structural Reinforcing Rods 2.Dead-end Component 3.AGS Clamp 4.EyeChainLink(TypeZH) 5.U-Clevis 6.Grounding Clamps
■ Model Specification:
Note:
1. The maximum single side suspension angle of single suspension clamp is 15 ° – 18 °.
2.The above configuration is a general configuration. Please refer to the appendix for other connection hardware and special instructions.
3.If you have special needs, you can consult our technology department.
